Buhler SnackFix - Change Scrapers at the Downholder of the SZ

Lubricate the machine
Maintenance Plan
92 SnackFix  2016-08
9.1.2 Change scrapers at the downholder of the SZ
 Technical employee
 Hygienic protective cap
 Hygienic protective clothes
 Safety shoes
 Safety gloves
Exchange scrapers
1.
Move the knife into top position at the control panel.
2.
Switch the machine off and secure against restarting.
3.
Lift up protective cover.
4.
Demount downholder.
Fig. 36: Downholder
5. Unscrew screws (2) and remove scrapers (1).
WARNING
Danger of injury from sharp edges at the knife and the
scrapers!
Sharp edges can cause severe cuts.
 Always wear protective gloves when working at sharp edges.
6. Insert new scrapers and firmly tighten screws (2).
7. Close protective cover.
Personnel:
Protective equipment:
1
2