Danger of injury from hot surfaces!
Component surfaces can heat up greatly during operation. Skin
contact with hot surfaces causes serious burns.
Always wear heat-resistant protective clothing/gear and protec-
tive gloves when working near hot surfaces.
Before starting any work, make sure that all surfaces have
cooled down to the ambient temperature.
Danger of injury from moving components!
Rotating and/or components moving linearly can cause serious
injuries.
Do not touch or handle moving components during operation.
Do not open covers or housing during operation.
Observe the after-run time: Before opening the covers or hous-
ing, make sure that no components are still moving.
Wear close-fitting protective clothing in the hazard zone with
low tear strength.
To Next Page
Loading...
