Burkert 8626 - Appendix B: Accessories (Fluidic)

48 - MFC/MFM
english
APPENDIX B: ACCESSORIES (FLUIDIC)
As a general rule, we offer screw-in joints with inch-system threads only. Flange
plates with inch-system screw-in threads are hence used.
The pipe connection side may be ordered either in metric or inch sizes. Brass
versions are available on request.
Screw-in thread
to DIN ISO 228/1
Pipe diam.
/Ø
Material Order no. Order no. for
sealing ring
G 1/4" 6 mm VA 901538 901575
G 1/4" 8 mm VA 901540 901575
G 3/8" 8 mm VA 901542 901576
G 3/8" 10 mm VA 901544 901576
G 1/2" 10 mm VA 901546 901577
G 1/2" 12 mm VA 901548 901577
G 3/4" 12 mm VA 901549 901578
G 1/4" 1/4" VA 901551 901579
G 1/4" 3/8" VA 901553 901579
G 3/8" 3/8" VA 901555 901580
G 3/8" 1/2" VA 901556 901580
G 1/2" 1/2" VA 901557 901581
G 1/2" 3/4" VA 901558 901581
G 3/4" 3/4" VA 901559 901582
- Sub-base version on request.
Further accessories for the fluidic connection of the MFC/MFM can be found
under Type 1013 in Bürkert Accessory Catalog.
Spare parts
* mesh size: 250 µm, **mesh size: 20 µm
ATTENTION!
With each joint a sealing ring must be ordered!
Designation Order no.
Stainless steel grid* for 8626 / 8006 / 8716 / 8706 (standard
housing)
646808
Stainless steel grid* for 8626 / 8006 / 8716 / 8706
(housing for high flow rates)
651694
Stainless steel grid* for 8710 / 8700 / 8711 / 8701 / 8712 / 8702 /
8713 / 8703
654733
Stainless steel grid** for 8710 / 8700 / 8711 / 8712 / 8713 667520