9
Type 8692, 8693
english
General Information
Safety Instructions
2 INTENDED USE
WARNING!
Incorrect use of the positioner Type 8692 and Type 8693 can be dangerous to people, nearby equipment and the
environment.
The device must not be used outside.•
The device must not be exposed to direct sunlight.•
Technical direct voltage must not be used as the power supply.•
During use observe the permitted data, the operating conditions and conditions of use specified in the contract documents •
and operating instructions, as described in chapter “System Description” - “Technical Data” in this manual and in the valve
manual for the respective pneumatically actuated valve.
The device may be used only in conjunction with third-party devices and components recommended and authorized by •
Bürkert.
In view of the wide range of possible application cases, check whether the positioner is suitable for the specific application •
case and check this out if required.
Correct transportation, correct storage and installation and careful use and maintenance are essential for reliable and •
problem-free operation.
Use the positioner Type 8692 and Type 8693 only as intended.•
2.1 Restrictions
If exporting the system/device, observe any existing restrictions.
2.2 Foreseeable Misuse
The positioner Type 8692 and Type 8693 must not be used in areas where there is a risk of explosion.•
Do not introduce any aggressive or flammable media into the system's media connections.•
Do not introduce any liquids into the media connections.•
Do not put any loads on the housing (e.g. by placing objects on it or standing on it).•
Do not make any external modifications to the device housings. Do not paint the housing parts or screws.•
To Next Page
Loading...
