59
Type 8692, 8693
english
Start-up, operation
position controller Type 8692
2.4.5 Adding auxiliary functions
ADD.FUNCTION
With ADD.FUNCTION auxiliary functions can be included in the main menu.
See chapter entitled "Configuration of auxiliary functions".
Skip this menu option during the initial start-up.
→
2.4.6 Leaving the main menu
To leave the main menu, press the left selection key (EXIT).
In doing so, the changes are transferred to the memory (EEPROM). "save EEPROM" is indicated on the display.
The device is then returned to the operating state in which it was before you switched to the main menu (MANUAL or
AUTOMATIC).
To Next Page
Loading...
