BWT AQA perla XL - Fine Adjusting Outlet Water Hardness

74
EN
8.7 Fine adjusting outlet water hard-
ness
Fully open the tap at the nearest cold water tap point
and use the AQUATEST hardness tester to test the
outlet water hardness.
If the value measured differs from the set value
(OUT),youcannelyadjustthesettings.
Pressthewaterdroplet
Pressthemanualoperationbutton
Motor blending appears
The wheel turns when motor blending is running.
Presstheuparrowtoincreasewaterhardness.
Pressthedownarrowtoreducewaterhardness.
245 l
121 l
10
10:10:37
Hardness
IN: 22 °d
OUT: 6 °d
Hardness
IN: 22 °d
OUT: 6 °d
Motor blending
OK