80
EN
8.12 Brine meter
The brine meter display allows you to keep track of
brine extraction.
Extraction progress is shown by a graphic and a
percentage countdown.
Failure to fully extract the brine indicates a fault; e.g.,
that the operating pressure is too low.
This information is displayed until the start of the
next regeneration.
8.13 Messages
The appearance of a red triangle on the display
indicates that a message exists.
Service
The Service indicator appears after 500 regenera-
tions or 12 months, whichever is sooner.
You must contact BWT customer service to have
maintenance performed.
Pressthetriangle
10:10:37
245 l
121 l
10
Service
Solezähler
100 %
10:10:37
245 l
121 l
10
Service
To Next Page
Loading...
