166 4-5 Driving Auxiliary Functions
■ Quick air leakage alarm
● In operating state, if one or more tires are leaking and the leakage rate
is greater than or equal to a certain value, the TPMS will give a quick
air leakage alarm within 15s and indicate the positions of leaking tires.
● If the vehicle gives tire leakage alarm, stop the vehicle without delay to
check the failed tire, and drive continuously after confirming that there
is no tire failure.
■ Signal abnormality alarm
● When the system is operating, an alarm signal will be given after a
fault is detected.
■ Real-time display of tire pressure
● The TPMS can display the real-time pressure of each tire in operating
state.
■ The normal working speed range of the TPMS: 30km/h~160km/h.
Alarm display explanations
Tire pressure failure indicator:
1. The tire pressure monitoring
system fault warning light
illuminates
2. The color of tire pressure
value changes to yellow
Check the corresponding tire
to confirm whether it has any
slow air leakage, and inflate
the tire to the reasonable
pressure range.
1. The tire pressure monitoring
system fault warning light
stays on after flashing
2. The numerical value of tire
pressure is displayed as
"Signal abnormality"
Check if the corresponding
tire pressure monitoring
module is normal and if it is in
the scope of a large electric
field for a long time.
To Next Page
