PMW20
169
1) BMS：Monitor the status of the power battery, and control the charging and
discharging of
the power battery according to the status of the entire forklift and the power battery.
2) 24V Charging and Discharging Contactor KM3：Switch on and off the charge and
discharge circuit.
3) Hall Sensor：Monitor battery charge and discharge current.
4)24V BMS Relay KA1/ Charging Relay KA2/ Controller Relay KA3/ Sleep Relay KA4/
Ignition Relay KA5：Interlock charge and discharge and realize sleep function.
PMW20
168
8.9.1.1 Warehouse Forklift with 24V Battery Power System
National Standard Rechargeable Battery
On-board Rechargeable Battery
1
2
3
4
SM-PMW202020001-EN
SM-PMW202020001-EN
To Next Page
Loading...
