To Next Page

To Previous Page

41cab - Produkttechnik GmbH

The following table shows some standard versions of cab-applicators :

Applicator type Labelling destin. Labelling type

Tamp Applicator downwards press on

with Lift Cylinder

Tamp Blow Applicator downwards blow on

with Lift Cylinder

Tamp Applicator sidewards press on

with Swing & Lift Cylinder

Blow Applicator sidewards/ blow on

with Swing Cylinder upwards

Table 8 cab-applicator types

For use in a networked system all cab-applicators are equipped with a PLC

interface with potential free inputs and outputs .

For the detailled description of the cab-applicators several Operator's Manuals

are available.

Questions and Answers:

Need help?

Do you have a question about the CAB Hermes Series and is the answer not in the manual?

CAB Hermes Series Specifications

General

Display	LCD with backlight
Cutter	Optional
Dispenser	Optional
Print Technology	Thermal Transfer
Resolution	203 dpi, 300 dpi, 600 dpi (depending on the model)
Interfaces	USB, Ethernet, Serial
Memory	64 MB RAM, 128 MB Flash
Media Types	Labels, continuous media
Supported Barcode Types	Data Matrix, QR Code
Max Print Width	4.09 inches (104 mm)