Calrec Apollo - Sets

CALREC Putting Sound in the Picture 57
BALANCED AES ONLY DK INPUTS
Input Pins
1
+ 1
- 14
Ground 2
2
+ 15
- 3
Ground 16
3
+ 4
- 17
Ground 5
4
+ 18
- 6
Ground 19
5
+ 7
- 20
Ground 8
6
+ 21
- 9
Ground 22
7
+ 10
- 23
Ground 11
8
+ 24
- 12
Ground 25
DK meters
DK meters can be fitted with up to 4 input
cards. Card types available from Calrec
are:
• Unbalanced digital only, providing 4
AES3id inputs per card, wired out to
BNC connectors on the console's rear
interface.
• Balanced digital only, providing 4
AES inputs per card, wired to female
D25 connectors on the console's rear
interface.
• Unbalanced digital and balanced
analogue mixed, providing 2 analogue
inputs and 1 AES3id input per card.
Analogue inputs are wired to female
D25s, digital to BNC's, both on the
console rear interface.
• Balanced digital and balanced
analogue mixed, providing 2 analogue
inputs and one AES input per card,
wired to female D25 connectors on the
console's rear interface.
• Analogue only, providing 8 balanced
analogue inputs per card, wired to a
female D25 connector on the rear
console's interface.
The input card types required affect the
internal wiring of the control surface and
should be specified at the time of order.
• Quantity of inputs available
dependent on the number of input
cards ordered.
• If more than two cards ordered, an
additional D25 connector is fitted in
the rear interface for inputs above
#8, pinned out the same as inputs
1-8.
MIXED AES & ANALOGUE DK INPUTS
Input Pins
AES 1 (3)*
+ 1
- 14
Ground 2
A n a l o g u e
1 (3) L
+ 4
- 17
Ground 5
A n a l o g u e
1 (3) R
+ 18
- 6
Ground 19
AES 2 (4)*
+ 7
- 20
Ground 8
A n a l o g u e
2 (4) L
+ 10
- 23
Ground 11
A n a l o g u e
2 (4) R
+ 24
- 12
Ground 25
• Quantity of inputs available
dependent on the number of input
cards ordered.
• If more than two cards ordered, an
additional D25 connector is fitted in
the rear interface for inputs above
3 & 4.
• If unbalanced digital inputs are
specified for this card type, only
the analogue inputs are on D25s,
the digital inputs are on BNC
connectors.