The Layer 2 firewall table may be used to configure rules matching
layer 2 (MAC layer) traffic which result in forwarding or dropping the
traffic over the radio link or Ethernet interface.
Disabled: Modifications to the Layer 3 Firewall Table are not allowed
and rules are not enforced.
Enabled: Modifications to the Layer 3 Firewall Table are allowed and
rules are enforced.
The Layer 3 firewall table may be used to configure rules matching
layer 3 (IP layer) traffic which result in forwarding or dropping the
traffic over the radio link or Ethernet interface.
Wireless MAC Address Filtering
Disabled: SMs with any MAC Address are allowed to register to the
AP.
Enabled: SMs with specific MAC address can be allowed (Permit) or
denied (Prevent) registration with the AP as configured under the MAC
Filter List.
Wireless MAC Filter
Policy
Prevent: All MAC Addresses configured under the MAC Filter List are
denied registration to the AP.
Permit: Only the MAC Addresses configured under the MAC Filter List
are allowed to register to the AP.
Configure the SM’s MAC addresses that will be permitted or prevented
from registering to the AP.
Friendly description to identify the SM
To Next Page
Loading...
Need help?
General
