Cambium Networks ePMP 1000 User Manual

CAMBIUM NETWORKS
026v003
178
AP eDetect page
The eDetect tool (not available in ePTP Master mode) is used to measure the 802.11 interference at
the ePMP radio or system when run from the AP, on the current operating channel. When the tool
is run, the ePMP device processes all frames received from devices not connected to the ePMP
system and collects the interfering frame’s information such as MAC Address, RSSI, and MCS. Use
the AP eDetect page to perform the following functions:
 Collect information about interferers system wide on the AP and the SMs connected to it to
display on the APs GUI.
 Collect information about interferers locally at the AP only to display on the AP’s GUI.
Figure 54 AP eDetect page

Cambium Networks ePMP 1000 Specifications

General

Brand	Cambium Networks
Model	ePMP 1000
Category	Wireless Access Point
Language	English