Radio spectrum planning
This section describes how to plan ePMP links to conform to the regulatory restrictions that apply
in the country of operation.
Caution
The user must ensure ePMP product operates in accordance to local regulatory limits.
Note
Contact the applicable radio regulator to check if registration of the ePMP link is required.
GENERAL WIRELESS SPECIFICATIONS
The wireless specifications that apply to all ePMP variants are listed under Table 65. The wireless
specifications that are specific to each frequency variant are listed in Table 66 and Table 67.
Table 65 ePMP wireless specifications (all variants)
Automatic and Manual selection (fixed frequency).
To avoid interference to other users of the band, maximum
power can be set lower than the default power limit.
Integrated device antenna
type
Adaptive TDD (with optional Standard 802.11n Wi-Fi on SM)
21 mi (5 MHz channel bandwidth)
17 mi (10 MHz channel bandwidth)
13 mi (20 MHz channel bandwidth)
9 mi (40 MHz channel bandwidth)
Table 66 ePMP 2000 wireless specifications (per frequency band)
5 MHz, 10 MHz, 20 MHz or 40 MHz
Connectorized antenna – 18 dBi
To Next Page
Loading...
Need help?
General
