Cambium Networks ePMP 1000 User Manual

CAMBIUM NETWORKS
026v003
57
EPMP 1000 INTEGRATED RADIO LEDS
LED
Function
POWER
Green: Power is applied to the device
Unlit: No power is applied to the device or improper
power source
ETH 1
Main/Primary Ethernet port indicator
Once lit, blinking indicates Ethernet activity
Green: 10/100BaseTX link
ETH 2
Auxiliary/Secondary Ethernet port indicator
Once lit, blinking indicates Ethernet activity
Green: 10/100BaseTX link
Radio scanning: LEDs light in an ascending
sequence to indicate that the radio is scanning
Radio registered: LEDs light to indicate the RSSI
level at the device.
RSSI
> -60
dBm
-70 dBm
< RSSI ≤≤
-60 dBm
-80 dBm
< RSSI ≤
-70 dBm
RSSI
≤ -80
dBm
EPMP 1000 INTEGRATED RADIO SPECIFICATIONS
The ePMP integrated module conforms to the specifications listed in Table 23 and Table 24.
The integrated device meets the low level static discharge specifications identified in
Electromagnetic compatibility (EMC) compliance on page 429 and provides internal surge
suppression but does not provide lightning suppression.
For a full listing of integrated radio specifications, see ePMP 1000 website.

Cambium Networks ePMP 1000 Specifications

General

Brand	Cambium Networks
Model	ePMP 1000
Category	Wireless Access Point
Language	English