Cambium Networks ePMP 1000 User Manual

CAMBIUM NETWORKS
026v003
44
Applying these formulae to the ePMP device at different wind speeds, the resulting wind loadings
are shown in Table 17 and Table 18.
Table 8 ePMP 2000 Access Point with Intelligent Filtering and Sync wind loading (Kg)
Type of ePMP
device
Largest
surface area
(square meters)
Wind speed (meters per second)
30
40
50
60
70
Connectorized
with Sector
Antenna
0.09
8.5 Kg
15 Kg
23.5
Kg
33.9 Kg
46.1 Kg
Table 9 ePMP 2000 Access Point with Intelligent Filtering and Sync wind loading (lb)
Type of ePMP device
Largest
surface area
(square feet)
Wind speed (miles per hour)
80
100
120
140
150
Connectorized with
Sector Antenna
1
26.9 lb
42 lb
60.1 lb
82.32 lb
107.5 lb
EPMP 2000 ACCESS POINT WITH INTELLIGENT FILTERING AND SYNC
SOFTWARE PACKAGES
ePMP 2000 Access Point with Intelligent Filtering and Sync devices may be upgraded by
downloading new software packages from the Cambium Networks website or by using the
Cambium Network Services Server. The software packages applicable to ePMP connectorized
radios are named:
 ePMP-GPS_Synced-v3.3.tar.gz (or higher version number)
EPMP 2000 ACCESS POINT WITH INTELLIGENT FILTERING AND SYNC,
ANTENNAS AND ANTENNA CABLING
ePMP 2000 Access Point with Intelligent Filtering and Sync devices require external antennas
connected using RF cables (included with Cambium ePMP sector antennas). For details of the
antennas and accessories required for a connectorized ePMP installation, see:
 Antenna requirements on page 44
 FCC and IC approved antennas on page 45
ANTENNA REQUIREMENTS
For ePMP 2000 Access Point with Intelligent Filtering and Sync units operating in the USA or
Canada 5 GHz bands, choose external antennas from those listed in FCC and IC approved antennas
on page 45. For installations in other countries, the listed antennas are advisory, not mandatory.

Cambium Networks ePMP 1000 Specifications

General

Brand	Cambium Networks
Model	ePMP 1000
Category	Wireless Access Point
Language	English