Cambium Networks ePMP 1000 User Manual

CAMBIUM NETWORKS
026v003
465
End Product Labeling
The ePMP Module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC
Certification Number are not visible when the module is installed inside another device, then the
outside of the device into which the module is installed must also display a label referring to the
enclosed module. In that case, the final end product must be labeled in a visible area with the
following:
Table 166 ePMP 2000 Product labeing
Region
Label
Access Point (AP)
“Contains Transmitter Module FCC ID: Z8H89FT0020” or “Contains
FCC ID: Z8H89FT0020”
Table 167 ePMP 1000 Product labeing
Region
Label
Access Point (AP)
“Contains Transmitter Module FCC ID: Z8H89FT0006” or “Contains
FCC ID: Z8H89FT0006”
Subscriber Module (SM)
“Contains Transmitter Module FCC ID: Z8H89FT0005” or “Contains
FCC ID: Z8H89FT0005”
Access Point (AP) /
Subscriber Module (SM)
“Contains Transmitter Module FCC ID: Z8H89FT0015” or “Contains
FCC ID: Z8H89FT0015”
Access Point (AP) /
Subscriber Module (SM)
“Contains Transmitter Module FCC ID: Z8H89FT0019” or “Contains
FCC ID: Z8H89FT0019”
Figure 86 FCC and IC certifications on 5 GHz product labels

Cambium Networks ePMP 1000 Specifications

General

Brand	Cambium Networks
Model	ePMP 1000
Category	Wireless Access Point
Language	English