CHAPTER 6: LEGAL AND REFERENCE
INFORMATION
COMPLIANCE WITH SAFETY STANDARDS
PAGE 6-71
Compliance with safety standards
This section lists the safety specifications against which the ePMP has been tested and certified. It also
describes how to keep RF exposure within safe limits.
Electrical safety compliance
The ePMP hardware has been tested for compliance to the electrical safety specifications listed in Table
58.
Table 58 ePMP safety compliance specifications
CSA C22.2 No.60950 2
nd
Edition
International CB certified and certified to IEC 60950-1:2005
(modified) plus EN60950-1:2006 + A1:2010
Electromagnetic compatibility (EMC) compliance
The ePMP complies with European EMC Specification EN301 489-1 with testing carried out to the
detailed requirements of EN301 489-4.
The EMC specification type approvals that have been granted for ePMP are listed under Table 59.
Table 59 EMC emissions compliance
Specification (Type Approvals)
FCC CFR 47 Part 15 class B
RSS210, Issue 8
RSS247, Issue 1 (May 2015)
To Next Page
Loading...
Need help?
General
