CHAPTER 2: SYSTEM HARDWARE
PAGE 2-8
CABLE, UL POWER SUPPLY CORD SET, UK
CABLE, UL POWER SUPPLY CORD SET, US
ePMP 3000 Access Point mounting bracket
The ePMP 3000 Access Point module is designed
to be pole-mounted using the mounting bracket
provided in the box with the radio.
Figure 5 ePMP 3000 Access Point module
mounting bracket
ePMP 3000 Access Point Interfaces
The Ethernet port is located on the bottom of the unit. This interface is described in Table 6.
Table 6 ePMP 3000 Series rear interfaces
Power over Ethernet (PoE)
Optical or Copper Gigabit
Ethernet
ePMP 3000 Access Point specifications