Cambium Networks ePMP 3000 Series User Manual

CHAPTER 4: USING THE DEVICE
MANAGEMENT INTERFACE
USING THE INSTALLATION WIZARD ACCESS
POINT
PAGE 4-8
Attribute
Meaning
parameter. Ensure that a thorough spectrum analysis has been completed prior to
configuring this parameter.
Installation wizard step 3 – Network parameters
Attribute
Meaning
Network
IP Assignment
Static: Device management IP addressing is configured manually in fields IP
Address, Subnet Mask, Gateway, Preferred DNS Server, and Alternate DNS
Server.
DHCP: Device management IP addressing (IP address, Subnet Mask, Gateway,
and DNS Server) is assigned via a network DHCP server, and parameters IP
Address, Subnet Mask, Gateway, Preferred DNS Server, and Alternate DNS
Server are not configurable.
IP Address
Internet protocol (IP) address. This address is used by the family of Internet
protocols to uniquely identify this unit on a network.
If IP Address Assignment is set to DHCP and the device is unable to retrieve IP
address information via DHCP, the device management IP is set to fallback IP
192.168.0.1 (Access Point) or 192.168.0.2 (Subscriber Module).

Cambium Networks ePMP 3000 Series Specifications

General

Brand	Cambium Networks
Model	ePMP 3000 Series
Category	Wireless Access Point
Language	English