CHAPTER 2: SYSTEM HARDWARE
PAGE 2-2
Chapter 2: System hardware
This chapter describes the site planning and hardware components of an ePMP link.
The following topics are described in this chapter:
Factors to be considered when planning the proposed network is described under Site planning on
page 2-3.
The ePMP 3000 Access Point hardware, part numbers, mounting equipment, and specifications are
described under ePMP 3000 Access Point on page 2-6.
The Force 300-25 module hardware, part numbers, mounting equipment, and specifications are
described under Force 300-25 on page 2-12.
The Force 300-16 module hardware, part numbers, mounting equipment, and specifications are
described under Force 300-16 on page 2-18.
The power supply hardware, part numbers and specifications are described under Power Supply on
page 2-22.
Cable standards and lengths are described under Ethernet cabling on page 2-25.
Surge suppression requirements and recommendations are described under Surge suppression unit
on page 2-27.