PAGE 1-3
Identity-based user accounts
When identity-based user accounts are configured, a security officer can define from one to four user
accounts, each of which may have one of the four possible roles:
ADMINISTRATOR , who has full read and write permission.
INSTALLER , who has permission to read and write
parameters applicable to unit installation and monitoring.
information for support purposes
who has permission to only view the Monitor
page.
SNMP
The management agent supports fault and performance management by means of an SNMP interface.
The management agent is compatible with SNMP v2c using one Management Information Base (MIB)
file which is available for download from the Cambium Networks Support website
(https://support.cambiumnetworks.com/files/epmp).
Network Time Protocol (NTP)
The clock supplies accurate date and time information to the system. It can be set to run with or without
a connection to a network time server (NTP). It can be configured to display local time by setting the
time zone and daylight saving in the Time web page.
If an NTP server connection is available, the clock can be set to synchronize with the server time at
regular intervals.
management network.
The Time Zone option is configurable on the Configure > System page and may be used to offset the
Software upgrade
Software upgrades may be issued via the radio web interface (Tools > Software Upgrade) or via
cnMaestro (cloud.cambiumnetworks.com). For software upgrades, see
https://support.cambiumnetworks.com/files/epmp.
Further reading on system management
For more information on system management, see:
Operation and Troubleshooting on page 5-1
To Next Page
Loading...
Need help?
General
