Cambium Networks ePMP 3000 Series User Manual

CHAPTER 2: SYSTEM HARDWARE
POWER SUPPLY
PAGE 2-22
Power Supply
For details of the ePMP power supply units, see:
 Power supply description on page 2-22
 Power supply part numbers on page 2-22
 Power supply interfaces on page 2-22
 Power supply specifications on page 2-23
 Power supply location on page 2-24
Power supply description
The power supply is an indoor unit that is connected to the ePMP module and network terminating
equipment using Cat5e cable with RJ45 connectors. It is also plugged into an AC or DC power supply so
that it can inject Power over Ethernet (PoE) into the module.
Power supply part numbers
Each module requires one power supply and one power supply line cord (line cord included with radio
device, see Table 12).
Table 26 Power supply component part numbers
Cambium description
Cambium part number
ePMP Pwr Supply for GPS Radio - no cord (spare)
N000900L001
Power supply interfaces
The power supply interfaces are illustrated in Figure 9 and described in Table 27 and Table 28.
Figure 9 Power supply interfaces
Gigabit
Data
Gigabit Data
+ Power
Power
input

Cambium Networks ePMP 3000 Series Specifications

General

Brand	Cambium Networks
Model	ePMP 3000 Series
Category	Wireless Access Point
Language	English