Playing
Back
Movies
with
WinDVD
SE
Play back your
discs
and video files
saved on the computer. For further
details, refer
to
the help files in the
WinDVD
SE
software.
Note that only the following movies can
be played back:
Discs -
Discs recorded and finalized with this
camcorder.
Discs created using GuideMenu
or
DVD MovieFactory SE.
Movie Files - Files that were saved on
the
computer
using
"Import".
CD
NOTES
• Depending
on
the type of disc and the
configuration of your computer, the
processor may
be
overloaded and
you
may notice some anomalies such
as
video stuttering or audio drop-outs.
•
For
Windows
Vista
users:
Depending
on
the configuration of your computer,
playback quality may
be
affected by
whether the Windows Aero graphic
interface
is
activated or not. If you
experience some anomalies during
playback even though your computer
complies with the system requirements,
try turning the Windows Aero function
on
or off.
• Playback quality may
be
affected
by
the power saving mode ofthe operating
system or the video card. If
you
are
using a laptop computer, try connecting
it directly to a power outlet.
• This program cannot
be
used to play
back CPRM-protected'discs.
10
IIF
DVD
MOVIEFACTORY
SE
OR
WINDVD
SE
I
ARE
NOT
WORKING
CORRECTLY
:tii
If you have the editing software Roxio
MyDVD
for
Canon installed in
your
computer, DVD MovieFactory SE
or
WinDVD
SE
may
not
work
correctly.
In
such case, follow
the
procedure below
to
solve the compatibility problem.
1 Connect the camcorder to the
computer.
• This step is
not
necessary
if
you
want
to
play
back
or
edit video
directly from a finalized
disc
in
the
computer's DVD drive.
• Close any running Corel
applications before continuing.
2 From the Start menu, open [My
Computer].
3 Right-click
on
the icon of the DVD
drive, and select [Properties].
4 Select the [UDF Reader] tab and
remove the check mark from the
[Enable UDF Reader
on
your
drives] option.
5 Click [Apply], then click [OK].
6 Start the Corel software.
To Next Page
Loading...
