• Retract
the
grip
belt
under
the
camcorder
so
it will
not
get
in
the
way
of
the
disc
cover.
• It
may take
a
moment
after
sliding
10PEN]
for
the
disc
cover
to
open.
2 Grab the edge of the disc and
gently pull it out.
Be
careful
not
to
touch
the
recording
surface
of
the
disc
or
the
pick
up
lens.
3 Close the disc cover.
__
IMPORTANT
When you slide IOPEN l after making a
recording, important file allocation data is
updated on the disc before the disc cover
opens. While the DISC access indicator
is
on
or
flashing
do
not subject the
camcorder
to
shocks such as forcefully
laying it on a table.
Inserting
and
Removing
a
Memory
Card
You
can
use
commercially
available
~.
SOHC
(SO High Capacity)
memory
cards,
S~
SO
memory
cards
or
MultiMedia
Cards
(MMC)
with
this
camcorder.
1
Turn
off the camcorder.
2 Open the memory card slot cover.
3 Insert the memory card straight all
the way into the memory card slot.
4 Close the cover.
Do not force the cover closed if the
memory card is not correctly inserted.
~
To
REMOVE
THE
MEMORY
CARD
,uI
I
First push
the
memory
card
once
to
release it, and then pull
the
card
out.
__
IMPORTANT
• Make sure
to
initialize all memory cards
before using them with this camcorder
(CO
60).
• Memory cards have front and back
sides that are not interchangeable.
Inserting a memory card facing the
wrong direction can cause a malfunction
of
the camcorder.
CD
NOTES
• Compatibility with all
SO,
SDHC or I
MMC memory cards cannot be
guaranteed.
•
About
SDHC
Memory
Cards:
SDHC is the
new type
of
SO
memory card with
capacities over 2 GB. Please note that
the specifications of SDHC memory
cards are different from those of regular
SO
memory cards and you will not be
able to use memory cards of over 2 GB
with devices that do not support SDHC.
However, SDHC devices (including this
camcorder) are backward compatible
and support regular
SO
memory cards.
Preparations
• 29
To Next Page
Loading...
Need help?
General
