10-13
Maintenance
Replacing the Toner Cartridge
8
Place the toner cartridge on a flat surface
and pull the seal completely out.
If toner is adhered on the removed seal, be careful
that your hands or clothes do not get dirty from
touching the toner.
Do not pull the seal out at an angle.
9
Hold the toner cartridge by its handle (A).
Do not open the drum protective shutter on the
toner cartridge. Print quality may deteriorate if the
drum surface is exposed to light or is damaged.
Always hold the toner cartridge by its handle.
10
Insert the toner cartridge so that the
protrusion (A) on the right side of the
toner cartridge fits into the guide (B)
located on the right side of the machine
and slide it down parallel to the guide.
To Next Page
Loading...
