Canon imageCLASS D530 - Selecting the Document Type; Adjusting the Sharpness

30
Selecting the Document Type
Select the appropriate document type.
1
Place your documents (→p.16).
2
Switch to the Copy mode (→ p.13).
3
Press [▲] or [▼] to highlight <Original Type>, and then press [OK].
4
Press [▲] or [▼] to highlight the appropriate document type, and then
press [OK].
<Text> Best suited for text-only documents.
<Text/Photo (High
Spe
ed)>
Suitable for documents that contain text and photos.
(Sca
nned documents are at a low resolution at high
speed.)
<Text/ Phot o> Suitable for documents that contain text and photos.
<Photo> Suitable for documents that contain large photos.
5
Press [ ] (Start).
Adjusting the sharpness
You can sharpen or soften the edges of images by adjusting the sharpness.
1
Place your documents (→p.16).
2
Switch to the Copy mode (→p.13).
3
Press [▲] or [▼] to highlight <Sharpness>, and then press [OK].
4
Press [◄] or [►] to adjust the sharpness, and then press [OK].
•
Select <Auto Density> to use the density that is most suitable for the document.
Sharpness
- +
– : Less sharpness (Suitable for photos)
+ : More sharpness (Suitable for documents
written in pen or pencil)
5
Press [ ] (Start).