65
Troubleshooting
Resolve a Displayed Message
This section describes some of messages related to the memory and paper.
For more details about other messages, see [Troubleshooting]
[Onscreen Messages] in the e-Manual.
Message Action
<Memory is full. Scanning
canc
eled. Print?>
• Print pages successfully scanned or cancel the job.
• Split the job into smaller subsets or change the <Original Type>. Change the
document type in <Photo ... Text> order.
<Incorrect Size/Setting>
• Change the <Paper Settings> to the size of the loaded paper
(→p.22).
• When printing with the printer driver, verify that the paper size setting on the
computer is correct.
<No Paper: Drawer 1>
<No P
aper: MP Tray>
• Load paper same as the paper type displayed on the screen (→p.22).
Resolve an Error Code
If an error occurs, a report that contains a 3-digit error code is printed. Locate the error code in the table and follow the
recommended actions to resolve the problem.
Error Code Cause Action
#001 A document jam has occurred. Remove the jammed document.
#037
The machine’s memory is full. Print or delete any documents stored in memory.
Th
e data size exceeds the machine’s
available memory.
Reduce the data resolution or change the le format to reduce
the data size.
To Next Page
Loading...
