Canon imageCLASS MF4370dn - Changing Standard Mode

Fax
5-29
Changing Standard Mode
Changing Standard Mode
Changing Standard Mode
This mode enables you to specify the standard scan settings for density and image quality.
1
Press [Menu].
2
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
5 FAX SETTINGS
MENU
3
Press [ ] or [ ] to select <USER
SETTINGS>, then press [OK].
2 USER SETTINGS
FAX SETTINGS
4
Press [ ] or [ ] to select <STANDARD
SETTINGS>, then press [OK].
5 STANDARD SETTINGS
USER SETTINGS
5
Press [ ] or [ ] to select the desired
setting item, then press [OK].
1 DENSITY
STANDARD SETTINGS
You can specify the following settings:
<DENSITY>: Adjusts the density of
documents. (See “Adjusting Density,” on p. 5-
23.)
<IMAGE QUALITY>: Adjusts the image quality
of documents. (See “Selecting Image Quality,”
on p. 5-24.)
6
Press [Stop/Reset] to return to the
standby mode.
–
–