Canon imageCLASS MF4370dn - Erasing Coded Dial Codes

Registering Destinations in the Address Book
3-7
Storing/Editing Coded Dial Codes
4
Press [ ] or [ ] to select the coded
dial code (00 to 99) you want to edit, then
press [OK].
[*00]Canon C
CODED DIAL
Ex.
You can also select a coded dial code by
pressing
[Coded Dial] followed by the
two-digit code.
5
Press [ ] repeatedly to go to the
character you want to change, then press
[Clear].
Canon C
NAME
Ex.
To delete the entire entry, press and hold
[Clear].
6
Enter a new character with –
[numeric keys], then press [OK].
Canon D
NAME
Ex.
7
Press [ ] repeatedly to go to the
number you want to change, then press
[Clear].
123XXXXXXX
TEL NUMBER ENTRY
Ex.
To delete the entire entry, press and hold
[Clear].
8
Enter a new number with – [numeric
keys], then press [OK].
124XXXXXXX
TEL NUMBER ENTRY
Ex.
9
Press [Stop/Reset] to return to the
standby mode.
Erasing Coded Dial Codes
Erasing Coded Dial Codes
1
Press [Menu].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
6 ADDRESS BOOK SET.
MENU
3
Press [ ] or [ ] to select <CODED
DIAL>, then press [OK].
2 CODED DIAL
ADDRESS BOOK SET.
4
Press [ ] or [ ] to select the coded
dial code (00 to 99) you want to erase,
then press [OK].
[*00]Canon C
CODED DIAL
Ex.
You can also select a coded dial code by
pressing
[Coded Dial] followed by the
two-digit code.
5
Press and hold [Clear] to erase the
destination name, then press [OK].
NAME [A]