Canon imageCLASS MF4370dn - Checking and Canceling Print Jobs

Printing
6-11
Checking and Canceling Print Jobs
Checking and Canceling Print Jobs
Checking and Canceling Print Jobs
You can check the status of print jobs and cancel a job before the printing starts.
Make sure that the Processing/Data indicator is on or blinking. When the Processing/Data indicator is off, there are no jobs in the
memory of the print job status.
1
Press [Job Cancel/Status Monitor]
repeatedly to select <PRINT STATUS> or
<JOB CANCEL>, then press [OK].
PRINT STATUS
If you select <JOB CANCEL>, press [ ] or [ ]
to select <PRINT>, then press [OK].
2
Press [ ] or [ ] to scroll through the
job list, and check the status of the print
jobs.
File - TXT
0001 18:30
Ex.
If you want to cancel the job, go to the next
step. Otherwise, press
[Stop/Reset] to return
to the standby mode.
3
Press [ ] or [ ] to select the job you
want to cancel, then press [OK].
File 2 - Note
0002 18:45
Ex.
4
Press [ ] or [ ] to select <CANCEL>,
then press [OK].
CANCEL
0002
If you select <JOB CANCEL> in step 1, you do
not need to perform this procedure. Go to the
next step.
5
Press [ ] to select <YES>.
If you do not want to cancel the job, press [ ]
to select <NO>.
< YES NO >
CANCEL PRINTING?
6
Press [Stop/Reset] to return to the
standby mode.