Canon imageCLASS MF4370dn - Changing Standard Mode

Copying
4-23
Changing Standard Mode
Changing Standard Mode
Changing Standard Mode
The Standard mode is the combination of copy modes that the machine automatically
applies when the power is turned ON, or when
[Stop/Reset] is pressed. You can change
the Standard mode to suit your needs.
The default settings are the followings:
<IMAGE QUALITY>: <TEXT/PHOTO>
<DENSITY>: <MANUAL> (5)
<ZOOM RATIO>: <100%>
<AUTO COLLATE>: <OFF>
<2-SIDED>: <OFF>
–
–
–
–
–
1
Press [Menu].
2
Press [ ] or [ ] to select <COPY
SETTINGS>, then press [OK].
4 COPY SETTINGS
MENU
3
Press [ ] or [ ] to select <STANDARD
SETTINGS>, then press [OK].
1 STANDARD SETTINGS
COPY SETTINGS
4
Press [ ] or [ ] to select the desired
setting item, then press [OK].
1 IMAGE QUALITY
STANDARD SETTINGS
You can specify the following settings:
<IMAGE QUALITY>
<DENSITY>
<ZOOM RATIO>
<AUTO COLLATE>
<2-SIDED>
If you press [Stop/Reset] before pressing [OK],
the setting will not be registered.
5
Press [Stop/Reset] to return to the
standby mode.
Press [Menu] to return to the previous display.
–
–
–
–
–