Canon imageCLASS MF4370dn - Setting the Incoming Ring

Fax
5-35
Setting the Incoming Ring
Setting the Incoming Ring
Setting the Incoming Ring
This function enables you to activate the ring alert of the external telephone if <RX MODE>
is set to <FaxOnly>. Selecting <ON> enables you to distinguish between the fax reception
and answer voice calls when you pick up the external telephone while it is ringing.
The default setting is <ON>.
1
Press [Menu].
2
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
5 FAX SETTINGS
MENU
3
Press [ ] or [ ] to select <RX
SETTINGS>, then press [OK].
4 RX SETTINGS
FAX SETTINGS
4
Press [ ] or [ ] to select <INCOMING
RING>, then press [OK].
1 INCOMING RING
RX SETTINGS
5
Press [ ] or [ ] to select <ON>, then
press [OK].
ON
INCOMING RING
6
Press [ ] or [ ] to set the number of
ring times, then press [OK].
2TIMES
RING COUNT
7
Press [Stop/Reset] to return to the
standby mode.