Canon imageCLASS MF4370dn - Storing;Editing One-Touch Keys

Registering Destinations in the Address Book
3-3
Storing/Editing One-Touch Keys
Storing/Editing One-Touch Keys
Storing/Editing One-Touch Keys
This section describes how to register destinations for one-touch keys and to edit the
registered one-touch keys.
Registering One-Touch Keys
Registering One-Touch Keys
1
Press [Menu].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
6 ADDRESS BOOK SET.
MENU
3
Press [ ] or [ ] to select <1-TOUCH
SPD DIAL>, then press [OK].
1 1-TOUCH SPD DIAL
ADDRESS BOOK SET.
4
Press [ ] or [ ] to select a one-touch
key (01 to 08) for which you want to
register the fax number, then press [OK].
[01] NOT REGISTERED
1-TOUCH SPD DIAL
You can also select a one-touch key by pressing
the corresponding one-touch key.
5
Enter the destination name (up to 20
letters, including spaces) with
–
[numeric keys], then press [OK].
Canon A
NAME [A]
Ex.
6
Enter the fax number you register (up to
50 digits, including spaces and pauses)
with – [numeric keys], then press
[OK].
123XXXXXXX
TEL NUMBER ENTRY
Ex.
To register another one-touch key, repeat the
procedure from step 4.
7
7
Press [Stop/Reset] to return to the
standby mode.
Editing One-Touch Keys
Editing One-Touch Keys
1
1
Press [Menu].
2
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
6 ADDRESS BOOK SET.
MENU
3
3
Press [ ] or [ ] to select <1-TOUCH
SPD DIAL>, then press [OK].
1 1-TOUCH SPD DIAL
ADDRESS BOOK SET.