Copying
4-8
Adjusting Density
Adjusting Density
You can adjust the density to the most appropriate level for the document either
automatically or manually.
The default setting is <MANUAL> (5).
Adjusting Automatically
You can adjust the density to the most appropriate
level for the document automatically.
Place documents.
For details, see “Placing Documents,” on p. 2-4.
Press [COPY].
Press [Density] twice to select
<AUTO>, then press [OK].
AUTO
DENSITY
The image quality is automatically set to <TEXT>.
Use
– [numeric keys] to enter the
desired copy quantity (1 to 99).
A TEXT 1
100% LTR
Press
[Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].
To Next Page
Loading...
