Canon imageCLASS MF4370dn - To 1-Sided Copying (Mf4380 Dn Only)

Copying
4-21
2-Sided Copying
7
Press [Start].
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as [FAX], all settings will
be canceled. If you want to keep the settings,
store the settings as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”
on p. 12-4.)
You can skip steps 5 and 6. In this case, the
machine scans 2-sided documents in the
<BOOK TYPE> orientation and outputs the
same way.
If you press [Start] in step 5 after selected
<CALENDAR TYPE>, the machine scans 2-sided
documents in the <CALENDAR TYPE>
orientation and outputs the same way.
–
–
–
–
2 to 1-Sided Copying (MF4380dn
2 to 1-Sided Copying (MF4380dn
Only)
Only)
You can make 1-sided copies from 2-sided
documents.
1
Place documents in the ADF.
For details, see “Placing Documents,” on p. 2-4.
2
Press [COPY].
3
Press [2-Sided] to select <2 >1-SIDED>,
then press [OK].
2 > 1-SIDED
2-SIDED
4
Press [ ] or [ ] to select <BOOK
TYPE> or <CALENDAR TYPE>, then press
[OK].
BOOK TYPE
TYPE OF ORIGINAL
<BOOK TYPE>: The front and back sides of the
document have the same top-bottom
orientation.
<CALENDAR TYPE>: The front and back sides
of the document will have the opposite top-
bottom orientation.
5
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
TEXT/PHOTO 1
100% * LTR
Ex.
6
Press [Start].
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as [FAX], all settings will
be canceled. If you want to keep the settings,
store the settings as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”
on p. 12-4.)
You can skip step 4. In this case, the machine
scans 2-sided documents in the <BOOK TYPE>
orientation to make 1-sided copies.
–
–
–
–
–