Canon iPF671 - Page 302

Chapter 7
7-46
Print item Print content Printed value
PARTS CNT. [Value of each parts
counter]
Status OK/W1/W2/E
Number of days after set Unit: Days
Count
Life threshold
Usage Unit: %
Cumulative count
COGFF CONDITION Cogging FF result 0: Disabled
1: Enabled
2: Check required
3: Adjust reruired
PITCHERR-F Pitch deviation in the forward path (FWD) -400 to 400 (1/100000 mm)
PITCHRR-B Pitch deviation of the return path (BWD)
PARAM0-F Parameters 1 REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
PARAM0-B Parameters 2 REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
PARAM1-F Parameters 1 REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
PARAM1-B Parameters 2 REF: Motor error (6 digits)
PHASE: Phase (3 digits)
AMP: Amplitude (3 digits)
RATE: Decay rate (3 digits)
LF/SCALE
ADJUSTMENT VALUE
MEDIA Type of paper that printed "PRINT INF"
LF-A User LF adjustment value A of the above
MEDIA (standard)
LF adjustment value (up to 4 decimal places)
LF-B User LF adjustment value B of the above media
(low pass)
SCALE-A User scale adjustment value A of the above
media (fine scale)
Scale adjustment value (integer)
SCALE-B User scale adjustment value B of the above
media (fast scale)
PV AUTO JUDGE Ink reduction mode ON (NORMAL/LOW only when ON)/OFF
*: NORMAL: normal mode, LOW: ink saving
mode
Inrush number of times Inrush number of times (0 to 254)
*: Times that swiched from NORMAL (normal
mode) to LOW (ink saving mode)
MULTI SENSOR UNIT Multi sensor version
DATA Multi sensor data