Canon MK3000 - Page 86

82
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
■
Fine-tuning the Print Position in the Vertical Direction ( Vertical
Adjust)
[Example] When printing on a tube (ø6.0 mm), the print position is shifted upward, so move
the print position downward by 0.5 mm.
ABCD
ABCD
Move the print position
downward by 0.5 mm.
1
Press the [Option] key.
2
Use [ ] or [ ] to select "Print adjust" and press the [Enter] key.
File
Print adjust
Setting
Option
3
Use [ ] or [ ] to select "VerticalPosition," and press the [Enter] key.
3ULQW

DGMXVW
Top position
VerticalPosition
Length
ɻ
4
Use [ ] or [ ] to select "Tube," and press the [Enter] key.
Vertical adjust
ShrinkTube
Label
Tube
5
Use [ ] or [ ] to select "ø6.0 mm" and press the [Enter] key.
Tube size
Љ5. 0ᶳ
Љ6. 0ᶳ
Љ6. 5ᶳ
Normal
Normal
Normal