Chapter 1 Introduction 1-11
Introduction
Special Function Buttons
FUNCTION button
Use to register user settings, to run the print head cleaning process,or to
print faxes stored in the MultiPASS’s memory.
CARTRIDGE button
Press to move the BJ cartridge holder to the center of the unit when
installing or replacing the cartridge. (Press again after installing the
cartridge to move the holder back to its home position on the right.)
RESUME button
Press when you want to form-feed paper when printing.
PRINTER RESET button
Press to reset the MultiPASS to Standby mode if the LCD displays
PRINTER MODE.
Arrow buttons
Use to scroll through menu selections,or to move the cursor when
registering data.
To Next Page
Loading...
