8200-M585-O1 Rev D 210 Installation & Technical 97
DIGITAL FILL CONTROL ID STORAGE, CONT.
To Delete A DFC-ID Setting
1. With the indicator in normal operations mode, press the key. The display will change
FUnCt=, press the PRESET key.
2. Enter up to a 6-digit alphanumeric ID string and press the Fn key.
3. The dELid prompt will be displayed, to delete the ID press the 1/YES key. The ID will be
deleted.
NOTE: To abort the delete operation, press the 0/NO key.
4. If the entered ID does not exist, the notFnd message will be displayed.
To Print A DFC-ID Setting
1. With the indicator in normal operations mode, press the key. The display will change
FUnCt=, press the PRESET key.
2. Enter up to a 6-digit alphanumeric ID string and press the PRINT key.
3. The Prtid prompt will be displayed, to print the ID press the 1/YES key. The ID will be
printed.
NOTE: To abort the print operation, press the 0/NO key.
4. If the entered ID does not exist, the notFnd message will be displayed.
To Delete All DFC-ID Setting
1. With the indicator in normal operations mode, press the key. The display will change
FUnCt=, press the PRESET key.
2. At the id= prompt, press the Fn key.
3. The dELALL prompt will be displayed, to delete all of the IDs press the 1/YES key. The
IDs and their associated settings will be deleted.
NOTE: To abort the print operation, press the 0/NO key.
4. The indicator will return to normal operation.
To Print All DFC-ID Setting
1. With the indicator in normal operations mode, press the key. The display will change
FUnCt=, press the PRESET key.
2.
At the id
= prompt, press the PRINT key.
3. The PrtALL prompt will be displayed, to print all of the IDs press the 1/YES key. The IDs
and their associated settings will be printed.
NOTE: To abort the print operation, press the 0/NO key.
4. The indicator will return to normal operation.
To Next Page
Loading...
Need help?
General
