8200-M585-O1 Rev D 210 Installation & Technical 36
SETUP AND CALIBRATION, CONT.
sCale= (Scale ID)
The Scale ID is used with the 2XX-USBA Option Card to identify the scale/indicator in the
Transaction Storage file. Note that up to 99 scale/indicator can be indentified.
Press the ENTER key to view the current setting. If the displayed value is acceptable, press
the ENTER key to save it. Otherwise, use the numeric keys to enter the new Scale ID and
then press the ENTER key to save the new setting. Allowable values are: 0 through 99.
To Next Page
Loading...
Need help?
General
