8200-M698-O1 Rev B 225 Installation and Technical
115
ACCUMULATORS, CONT.
ID Accumulators
To View An ID Accumulator:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
change to show ACCUMULATOR=.
2. Press the ID key. The display will change to show Id=.
3. Enter the ID string and press the ENTER key.
4. The display will show Ref=XXXXXXXXXXXX. Note that XXXXXXXXXXXX is the
name associated with the ID.
5. Press the ENTER key.
6. The display will change to show the current tare weight stored.
7. Press the ENTER key.
8. The display will change to show the accumulator value of the ID entered or if the
accumulator value is greater than (>) 999,999,999, OVERFLOW will be displayed.
9. Press the ENTER key to return to normal operation.
To Print A Single ID Accumulator:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
change to show ACCUMULATOR=.
2. Press the ID key. The display will change to show Id=.
3. Enter the ID string and press the ENTER key.
4. The display will show Ref=XXXXXXXXXXXX. Note that XXXXXXXXXXXX is the
name associated with the ID.
5. Press the ENTER key.
6. The display will change to show the current tare weight stored.
7. Press the ENTER key.
8. The display will change to show the accumulator value of the ID entered or if the
accumulator value is greater than (>) 999,999,999, OVERFLOW will be displayed.
9. Press the PRINT key. The accumulator value for the ID entered will be printed.
10. The indicator will return to normal operation when printing has been completed.
To Print All Active ID Accumulators:
1. With the indicator in normal operations mode, press the ACCUM key. The display will
change to show ACCUMULATOR=.
2. Press the ID key. The display will change to show Id=.
3. Press the PRINT key.
4. The display will show Printing.
5. The accumulator values for ALL active IDs will be printed.
6. The indicator will return to normal operation when printing has been completed.
To Next Page
Loading...
