8200-M698-O1 Rev B 225 Installation and Technical
65
CALIBRATION AND SETUP, CONT.
9. GROSS=YY.XX (GROSS WEIGHT PRINT LOCATION)
With PRINT TABBING MENU #1 displayed the current setting for the GROSS=
parameter will be shown. Note that YY.XX is the current position for printing of the
Gross weight. If the position displayed is acceptable, proceed to the next setup
parameter.
Otherwise, press the 9 key, the ENTER key and then using the numeric keys, enter the
new print position and then press the ENTER key to save the new setting and return to
PRINT TABBING MENU #1.
10. TARE=YY.XX (TARE WEIGHT PRINT LOCATION)
With PRINT TABBING MENU #1 displayed the current setting for the TARE=
parameter will be shown. Note that YY.XX is the current position for printing of the Tare
weight. If the position displayed is acceptable, proceed to the next setup parameter.
Otherwise, press the 1 and 0 keys, the ENTER key and then using the numeric keys,
enter the new print position and then press the ENTER key to save the new setting and
return to PRINT TABBING MENU #1.
With PRINT TABBING MENU #1 displayed, press NEXT (Navigation Keys Down Arrow) to
proceed to PRINT TABBING MENU #2.
PRINT TABBING MENU #2
11. NET=YY.XX 16. TIME=YY.XX
12. G ACCUM=YY.XX 17. DATE=YY.XX
13. N ACCUM=YY.XX
14. COUNT=YY.XX
15. PCS WT=YY.XX
Enter Selection: 0 ^ PREV ` EXIT
11. NET=YY.XX (NET WEIGHT PRINT LOCATION)
With PRINT TABBING MENU #2 displayed the current setting for the NET= parameter
will be shown. Note that YY.XX is the current position for printing of the Net weight. If
the position displayed is acceptable, proceed to the next setup parameter.
Otherwise, press the 1 key twice, the ENTER key and then using the numeric keys,
enter the new print position and then press the ENTER key to save the new setting and
return to PRINT TABBING MENU #2.
To Next Page
Loading...
