6
revision 0 date: 07/19 doc. AG525990
IMPORTANTE: Non spruzzare MAI acqua
fredda sulla pompa di iniezione mentre il
motore è in funzione al ne di evitare il
rischio di grippaggio della testata idraulica.
IMPORTANTE: Nel lavaggio con getto ad
alta pressione, direzionare il getto di acqua
direttamente su componenti elettrici o
elettronici, connettori, cuscinetti, paraolio, pompe
di iniezione o altre parti e componenti delicati, si
possono causare guasti alla macchina. Ridurre la
pressione e spruzzare con un angolo da 45° a 90°.
- Manutenzione del trattore in sicurezza
IMPORTANT: NEVER spray cold water onto
injection pump when engine is running or
the hydraulic head might seize.
IMPORTANT: Washing with a high pressure
jet Aiming a water jet directly on electrical
or electronic components, connectors,
bearings, oil seals, injection pumps or any other
delicate parts and components could damage the
machine. Reduce pressure and aim at an angle
ranging between 45 and 90°.
- Maintenance of the tractor in safety
- Cut power to implements and stop engine before
attempting any repair or adjustment.
- Disengage the power take-os.
- Disconnect the Battery between the battery cut-o
switch
- Remove the ignition key
- Maintain the vehicle, the tools and the trailers in
good operating conditions, diligently following
the guidelines provided in this manual and in the
relative user manual of the manufacturer of the
equipment or of the trailer.
- Keep all safety devices in place and in good
working conditions.
- Keep all the nuts, bolts and screws tightened
so that you are sure that the equipment is in
appropriate working conditions. Should you refer
to a specic and well-dened tightening torque,
make sure that you use a duly calibrated tool: if in
doubt, calibrate the tool.
- Stop engine and allow for cooling before working
on any engine parts. Engine red hot parts could
cause burns.
- Do not turn the engine unless the reverser lever
and transmission controls are in neutral position
and the parking brake is engaged.
- Keep clothing, jewellery and long hair away from
the fan, driving belts or any other engine moving
parts to prevent them from getting caught.
- Any unauthorised modication possibly made to
machine could impair its operation and/or restrain
its safety features and life.
To Next Page
Loading...
