6
revision 0 date: 07/19 doc. AG525990
- Manutenzione dell’impianto elettrico -
sostituzione delle lampadine delle luci di
ingombro, di stop e degli indicatori di
direzione
- Electric system maintenance - changing the
bulbs for clearance lights, stop lights and turn
indicators
- Ignition o.
- Remove the two glass retaining screws. Remove
glass (1).
- Push bulb into socket overcoming spring load.
Turn and pull to remove bulb.
- Push bulb into socket and screw until it locks in
socket.
- Clean and install glass (1).
- Manutenzione dell’impianto elettrico -
sostituzione delle lampadine delle luci di
posizione/indicatori di direzione
- Electric system maintenance - changing the
bulbs for position lights/turn indicators
- Ignition o.
- Remove the two glass retaining screws. Remove
glass (1).
- Push bulb into socket overcoming spring load.
Turn and pull to remove bulb.
- Push bulb into socket and screw until it locks in
socket.
- Clean and install glass (1).
To Next Page
Loading...
