5
A150172
S Format your contact information and logo (if applicable) using the PC/MAC
Desktop application available at
www.MyInfinityTouch.Carrier.com/Infinity/Downloads
, and save it to a
standard USB drive. See Section 6.7 for more information.
S Touch the SERVICE icon for about 10 seconds, then touch DEALER LOGO
UPLOAD.
S Place the USB drive into the USB port on the bottom of the Infinity Touch
Control and follow the on screen prompts.
S More detailed information can be found on HVACPartners.com under the
Product tab> Thermostats & Controls> SYSTXCCITW01> Documents &
Downloads> Marketing/Miscellaneous> Infinity Touch Control Dealer Logo
Application -- Instructions.
4. Installation
4.1. Overview
This instruction covers installation of the Infinityr Touch Control and the Infinityr
Wireless Access Point only. Physical installation instructions for the indoor and
outdoor equipment, and accessories are provided with each unit.
To Next Page
Loading...
Need help?
General
