Carrier SYSTXCCITN01-A - Safety Considerations; Introduction; Quick Start; Set Time and Date

TABLE OF CONTENTS
PAGE
1.Safety Considerations 1.............................................
2.Introduction 1.....................................................
3.Quick Start 2......................................................
3.1.Set Time and Date 3............................................
3.1.1. Manually Adjust Time and Date 3............................
3.1.2. Setup Time Zone 4........................................
3.1.3. Enable Time Synchronization 4..............................
3.2. Set Dealer Information 4........................................
4.Installation 5......................................................
4.1.Overview 5...................................................
4.2.Check Equipment 6............................................
4.3.Location 7....................................................
4.3.1. Wall Control 7...........................................
4.3.2. Remote Room Sensors 8...................................
4.3.2.1.Remote Room Sensor Averaging 8...........................
4.3.3. Smart Sensors (for zoning applications) 9......................
4.4.Wiring Considerations 9.........................................
4.4.1. Shielded Wire 12.........................................
4.4.2. Damper Control Module 13.................................