40
A13230
Shutdown: This setup option selects the change of state required for shutdown.
Select Normally Open or Normally Closed, and then save your selection.
6.3.3.10 Furnace G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main
screen and in the notification email when the alert becomes active.
A14224
6.3.4. AC/Heat Pump
First touch SETUP, then touch AC/HEAT PUMP to set up the parameters for the
AC/Heat Pump unit.
NOTE: For Geo HP setup, see Sec 6.3.7.