77
S After the control has connected to the network, go to
www.MyInfinityTouch.Carrier.com
to register the unit and begin remote access.
This requires the MAC address and serial number of the Infinity
®
Touch Wall
Control. To find the serial number and MAC address of the Infinity
®
Touch
Wall Control, click on Menu, Down Arrow, Wireless and View MyInfinity Info.
This screen will provide the information needed on the MyInfinity website
during registration.
S If you have any issues, please contact your servicing dealer or contact the
support desk at 1--800--Carrier.
S When the connection to the MyInfinity web server has been established, the
status screen will show Connected for both Wi--Fi and the server.
Connected:
Not Connected:
A13242
7.2 SYSTXCCITW01--A Models (only)
To establish the Wi--Fi
®
network connectivity to the Infinity Touch Control through
the Infinity System Wireless Access Point (TP--LINKR Device), connect the WAN
(BLUE port) connection of TP--LINK Wireless Access Point to the home’s existing
router LAN port using the provided Ethernet cable. The LAN ports on the back of
the TP--LINK Wireless Access Point should not be used for other devices. The
Infinity (TP--LINK) Wireless Access Point should only be used for connection of
the Infinity Touch Control(s) and is not intended to be used wired or wirelessly with
any other devices.
To Next Page
Loading...
Need help?
General
