80
A12117
S The control will inform you if the connection is successful. If so, touch DONE.
d If the connection is unsuccessful, verify that the proper information has
been entered before you touch RETRY. The control will go through the
process again.
A12118
S After your control has connected to the network, go to
www.MyInfinityTouch.Carrier.com
to register the unit and begin remote access.
This requires the MAC address and serial number of the InfinityR Touch Wall
Control, NOT the Wireless Access Point. To find the serial number and MAC
address of the Infinity Touch Wall Control, click on Menu, Down Arrow,
Wireless and View My Infinityr Info. This screen will provide the information
needed on the MyInfinityr website during registration.
To Next Page
Loading...
Need help?
General
